成都泰马克科技

图片展示

质量、质心测量台(mass and centroid measuring table)

质量、质心测量采用多支撑点测量方法,在同一测量台上同时测量试件的质量、质心。安装不同的夹具,可以测量各种不规则物体(如导弹发射架、飞机黑匣子、电子组件等);在测量平台上安装支架,可以测量各种回转体(如导弹)。(The mass and centroid measurement adopts the multi-support point measurement method, and the mass and centroid of the specimen are measured simultaneo

待议 分享

系统特点:

采用多支撑点测量方法,测量系统对调平要求不高,只需要在设备安装时进行一次调平工序,以后测量时不需要进行调平,使用方便。

台面上设计了直线导轨,两个托架不仅可以非常灵活地前后移动,而且定位精度高,试件可以安装在托架上的任意位置安装灵活方便。

安装托架可以上下,左右调节方便大范围直径试件和锥形试件的安装。左右托架位置用丝杠调整,可以非常轻松进行圆锥型试件在托架上的调平。

测量台采用了高精度的标校件,可以精确对传感器位置和系统精度进行标定考核,实现设备的自校准。

产品一次吊装,可以测量质量、质心和质偏。测量时只需转动试件到0°、90°、180°、270四个位置,中间不需要任何操作,测量时间短、效率高、劳动强度小。

高精度系列:

采用电子天平,具有更高的测量精度,量程200kg以下均可以采用高精度系列,径向质心测量误差小于0.02mm,纵向质心测量误差小于0.05mm

System features:

the multi-support point measurement method is adopted, the measurement system does not require high leveling, it only needs a leveling process when the equipment is installed, and it does not need to be leveled in the future, so it is convenient to use.

The linear guide rail is designed on the table. The two brackets can not only move back and forth very flexibly, but also have high positioning accuracy. The specimen can be installed in any position on the bracket flexibly and conveniently.

The mounting bracket can be adjusted up and down to facilitate the installation of large range diameter specimens and conical specimens. The position of the left and right bracket is adjusted with the lead screw, which can easily adjust the conical specimen on the bracket

The measuring table adopts high-precision calibration parts, which can accurately calibrate the sensor position and system accuracy, and realize the self-calibration of the equipment

Product hoisting, can measure quality, centroid and quality deviation. When measuring, only need to rotate the specimen to 0°,90°,180°,270 four positions, no operation in the middle, short measurement time, high efficiency and small labor intensity.

High precision series: 

adopt electronic balance, have higher measurement precision, range below 200 kg can adopt high precision series, radial centroid measurement error is less than 0.02 mm, longitudinal centroid measurement error is less than 0.05 mm.




质量、质心测量台(mass and centroid measuring table)
质量、质心测量采用多支撑点测量方法,在同一测量台上同时测量试件的质量、质心。安装不同的夹具,可以测量各种不规则物体(如导弹发射架、飞机黑匣子、电子组件等);在测量平台上安装支架,可以测量各种回转体(如导弹)。(The mass and centroid measurement adopts the multi-support point measurement method, and the mass and centroid of the specimen are measured simultaneo
长按识别二维码查看详情
长按图片保存/分享
询盘

  • 提交

  • 验证码
    看不清?换一张
    取消
    确定

咨询内容:


你还没有添加任何产品

Copyright ©  2016 企业形象官网模板   版权所有