成都泰马克科技

图片展示

非标准物体质量质心转动惯量测量台(Non-standard mass centroid moment of inertia measuring table)

针对一系列非标准物体的质心及转动惯量的测量。具有测量方便,数据采集精度高等优点。(Measurement of centroid and moment of inertia of a series of non-standard objects. It has the advantages of convenient measurement and high accuracy of data acquisition.)

待议 分享

质量质心测量模块:

质量质心测量软件模块主要功能是测量试件的质量、质心和质偏。

测量分为空载测量和加载测量,加载测量分四次,分别为090180270度,所有测量完成后,测量的结果自动显示。软件有保存过程数据、保存结果数据、调用过程数据等功能。

界面上还有电机上升下降控制单元。三个分质量显示框和一个总质量显示框,方便用户实时观看各支撑点质量的变化。

设计了平台升降错误报警模式,如果限位行程开关损坏、或者三向电机线接反,计算机均可报警,保证设备在任何误操作下的安全。

转动惯量测量模块:

转动惯量测量软件模块可以同时测量试件的IxIyIz,测量分Iy空载和加载、Iz空载和加载,Ix空载和加载的摆动烦率。可以自动计算转动惯量。各部分测量不分次序,某一项也可以不测,每一项一般可进行三次测量,软件自动计算多次测量的平均值。

数据管理模块:

为了方便结果数据、测量过程数据的存储、调用、删除和测量结果的打印,设计了数据管理模块,在数据管理模块中,可以很容易查找以前的测量记录,查看测量数据,打印以前的测试结果,数据库的内容可以选择多项导出到Word表格中,供用户存挡和集中打印。

主要技术指标:

要求能测量微小型飞行器XYZ三个方向的质心位置和绕XYZ三个轴的转动惯量;所测量微小型飞行器最大尺寸为:翼展5.0米,高10米,长3.0米。

质量测量范围:500g~25kg

质量测试精度:≤±6g;

质心测量精度:5~25kg范围内≤±1mm500g~5kg范围内≤±2mm;

转动惯量测量范围:0.1kgm2-10.0kgm2

转动惯量精度:≤±1%.

 

Mass centroid measurement module:

The main function of the quality centroid measurement software module is to measure the quality, centroid and deviation of the specimen

The measurement is divided into no-load measurement and loading measurement. The loading measurement is divided into four times, which are 0 degrees 90 degrees 180 degrees 270 degrees. After all the measurements are completed, the results of the measurement are automatically displayed. The software has the function of saving process data, saving result data, calling process data and so on.

There is also a motor rise and fall control unit on the interface. Three sub-quality display boxes and a total quality display box are convenient for users to watch the quality changes of each support point in real time.

The alarm mode of platform lifting error is designed. If the limit stroke switch is damaged or the three-way motor line is connected back, the computer can alarm to ensure the safety of the equipment under any misoperation.

Rotational inertia measurement module:

The software module of moment of inertia measurement can simultaneously measure the IxIy and Iz, measurement of the specimen Iy no-load and loadingIz no-load and loading, and ix the swing annoyance of no-load and loading. The moment of inertia can be calculated automatically. Each part of the measurement is not in ordera certain item can also be unexpected, each item can generally be measured three times, the software automatically calculates the average value of multiple measurements.

Data management module:

in order to facilitate the storage of result data, measurement process data, call, delete and print measurement results, the data management module is designed. In the data management module, it is easy to find the previous measurement records, view the measurement data, print the previous test results.

Key technical indicators:

The center of mass xyz three directions and the moment of inertia around xyz three axes are required to be able to measure the center of mass of the micro-aircraft. The maximum size of the micro-aircraft is 5.0 meters ,10 meters high and 3.0 meters long.

Mass measurement range :500 g~25 kg

Mass testing accuracy :≤±6 g

Precision of centroid measurement :5~25 kg ≤±1 mm;  5

Area of inertia :0.1 kgm2-10.0kgm2

Accuracy of moment of inertia :≤±1%

 



非标准物体质量质心转动惯量测量台(Non-standard mass centroid moment of inertia measuring table)
针对一系列非标准物体的质心及转动惯量的测量。具有测量方便,数据采集精度高等优点。(Measurement of centroid and moment of inertia of a series of non-standard objects. It has the advantages of convenient measurement and high accuracy of data acquisition.)
长按识别二维码查看详情
长按图片保存/分享
询盘

  • 提交

  • 验证码
    看不清?换一张
    取消
    确定

咨询内容:


你还没有添加任何产品

Copyright ©  2016 企业形象官网模板   版权所有